Federal University Oye-Ekiti Institutional Repository >
FACULTY OF ENGINEERING >
Mechatronics and Mechanical Engineering >
Mechatronics and Mechanical Thesis >

Please use this identifier to cite or link to this item: http://repository.fuoye.edu.ng/handle/123456789/1460

Title: DESIGN AND CONSTRUCTION OF A GSM BASED HOME AUTOMATION SYSYTEM
Authors: ABEREOLA, O
Keywords: DESIGN
CONSTRUCTION
GSM-BASED
HOME
AUTOMATION SYSTEM
Issue Date: 14-Jan-2019
Abstract: With advancement of technology, things are becoming simpler and easier for us. Automatic systems are being preferred over manual systems. The purpose of this project is to design and construct A GSM based home automation using AVR. Using GSM networks, in this project a home power control system has been proposed that will act as an embedded system which can monitor and control appliances and other devices locally using built-in input and output peripherals. The system has a delay of 2 two minutes after the first call to initiate the next command. This project is made up of four vital units. These units are as follows: GSM module unit, peripheral interface control (PIC) unit, driver unit and a power monitoring and control unit. The GSM module is a GSM transceiver which gives the system access to the GSM service provider. The peripheral interface control (PIC) is programmed to carry out the OFF/ RESET operation according to the GSM commands while the driver and control unit consist of capacitors, resistors, diodes, regulators and electromagnetic relay is to effect power switching. The major component that performed the power control of 220v main supply and the automatic voltage regulation (AVR) is the automated electromagnetic relay. The project was realized and a light bulb was literarily used for the demonstration; it was automated using the system developed.
Description: With advancement of technology, things are becoming simpler and easier for us. Automatic systems are being preferred over manual systems. The purpose of this project is to design and construct A GSM based home automation using AVR. Using GSM networks, in this project a home power control system has been proposed that will act as an embedded system which can monitor and control appliances and other devices locally using built-in input and output peripherals. The system has a delay of 2 two minutes after the first call to initiate the next command. This project is made up of four vital units. These units are as follows: GSM module unit, peripheral interface control (PIC) unit, driver unit and a power monitoring and control unit. The GSM module is a GSM transceiver which gives the system access to the GSM service provider. The peripheral interface control (PIC) is programmed to carry out the OFF/ RESET operation according to the GSM commands while the driver and control unit consist of capacitors, resistors, diodes, regulators and electromagnetic relay is to effect power switching. The major component that performed the power control of 220v main supply and the automatic voltage regulation (AVR) is the automated electromagnetic relay. The project was realized and a light bulb was literarily used for the demonstration; it was automated using the system developed.
URI: http://repository.fuoye.edu.ng/handle/123456789/1460
Appears in Collections:Mechatronics and Mechanical Thesis

Files in This Item:

File Description SizeFormat
DESIGN AND CONSTRUCTION OF A GSM-BASED HOME AUTOMATION SYSTEM.pdf1.89 MBAdobe PDFView/Open
View Statistics

Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.

 

Valid XHTML 1.0! DSpace Software Copyright © 2002-2010  Duraspace - Feedback