Federal University Oye-Ekiti Institutional Repository >
FACULTY OF ENGINEERING >
Mechatronics and Mechanical Engineering >
Mechatronics and Mechanical Journal Publications >

Please use this identifier to cite or link to this item: http://repository.fuoye.edu.ng/handle/123456789/1418

Title: Simulation of Load during Rod Rolling of HCSS316 at Low Strain Rate
Authors: Aiyedun, P.O.
Igbudu, O.S.
Bolaji, Bukola Olaleken
Keywords: Rod rolling
Strain rate
Issue Date: 2008
Publisher: Faculty Engineering, University of Benin, Benin City, Nigeria
Series/Report no.: 2nd International Conference;
Abstract: In this work, rolling loads of HCSS316 for seventeen sequential passes for the reduction of a 125 x 125 mm2 billet to a 16 mm diameter rod at four different starting mean temperatures of 9880C, 10940C, 10950C and 11910C and at different strain rates of 0.4s-1, 0.8s-1, 1.2 s-1 and 1.6 s-1 respectively, were simulated using the “Phantom Roll” method for Carbon-Manganese steel. In general, it was observed that load value increased as starting temperature decreases and for each set of starting temperatures, the load value increases with temperature. In all cases, the load values for grooved rolls were higher than those for flat rolls.
URI: http://repository.fuoye.edu.ng/handle/123456789/1418
Appears in Collections:Mechatronics and Mechanical Journal Publications

Files in This Item:

File Description SizeFormat
CP6-2008 Aiyedun et al Simulation of Load ICERD(April 2008)422-430.pdf241.48 kBAdobe PDFView/Open
View Statistics

Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.

 

Valid XHTML 1.0! DSpace Software Copyright © 2002-2010  Duraspace - Feedback